Care & Assembly

Table Assembly Instructions:

Most of the assembly of our products has been completed. You only need to simply assemble the table top and table legs with screws to complete the final work. Screws and Allen key included in your shipment.

 

*Assembly is best done upside down on floor or other hard surface with blanket or protective cloth underneath to avoid scratching table top*

*The solid wood table will be very heavy. We recommend that 2-3 people work together to assemble it. Please do not take the risk of assembling it alone. A falling table top will cause irreparable damage.*

 

1. Place the legs into the section that has been cut out for them. If a section has not been cut out for them, line up all of the holes in the legs with the holes in the table.

 

2. Make sure that the holes in the legs line up with the holes in the wood.

 

3. Insert one screw into each hole and tighten using a screwdriver/Allen wrench. DO NOT OVER TIGHTEN

 

4. Screw in each screw until all holes are filled.

 

5. Repeat steps 1-4 for each hairpin leg.

 

Care Guide:

-Most of our products are finished with conversion varnish. We recommend dusting with a damp cloth following the grain. We recommend dusting with a polish-moistened or damp cloth following the grain.

Be sure to only use a damp rag and not saturate the floor with liquid.

 

Best Practices

*All grades of solid wood are at risk of cracking when temperature/humidity change drastically. We recommend that your solid wood furniture should be kept away from heating or cooling equipment.*

• Never use scouring pads, steel wool, or powdered cleaners.
• Do not use products containing bleach, ammonia, or abrasive additives, and do not allow oven cleaners to come into contact with the wood finish.
• Avoid placing small appliances where heat is directed onto the wood surface.
• Minimize contact with liquids, as excessive moisture exposure can cause permanent damage. Avoid draping damp cloths or dishtowels on the wood surface.